(Introduction to subnet computing tool v1.1------------------ * the software functions include two parts: (1) calculate all IPS in the network segment from any IP address and mask bits. (2) Calculate the IP range of each network segment from a network address and the number of networks to be divided Operation (1) the operation of function 1 is as follows: enter any IP address (hold point and enter to transfer focus) in the address field, and then select the mask bits. While selecting the mask, the machine automatically calculates the IP range, network address, network mask and other information of this network segment. (2) The operation of function 2 is as follows: enter a network address in the address bar (Note: since some network addresses with 0, such as x.x.0.x, have different functions, you may try it), Then select the number of subnets to be divided (the number of subnets is a fixed value. If the number of subnets you want to divide is not one of them, you need to select a minimum number greater than it. At present, the software can only support the division of 256 networks at most), and then calculate the IP range, network mask and the maximum number of IPS of each network segment by calculation.
This document contains the following attachments:
Operator netmask exe....)
收藏
