介绍了依据嵌入式Linux2.4.18的CS8900A网卡驱动的终结方法。通过将以太网器件CS8900A连接到嵌入式微管理器S3C2410X的总线上拓宽网络接口，依据电路原理图，设置寄存器BWSCON和BANKCON3使网卡办公在存储器方式，编写间断函数及相关的驱动代码。

(The termination method of CS8900A network card driver based on embedded Linux 2.4.18 is introduced. By connecting the Ethernet device CS8900A to the bus of the embedded microcontroller S3C2410X, the network interface is widened. According to the circuit schematic diagram, the registers BWSCON and BANKCON3 are set to make the network card work in the memory mode, and the interrupt function and related driver codes are written.)

[下载]17452342054.rar

2022-7-29 17:45 上传

文件大小: 374 KB
下载次数: 0

介绍了依据嵌入式Linux2.4.18的CS8900A网卡驱动的终结方法。通过将以太网器件CS8900A连接到嵌入式微管理器S3C2410X的总线上拓宽网络接口，依据电路原理图，设置寄存器BWSCON和BANKCON3使网卡办公在存储器方式，编写间断函数及相关的驱动代码。

(The termination method of CS8900A network card driver based on embedded Linux 2.4.18 is introduced. By connecting the Ethernet device CS8900A to the bus of the embedded microcontroller S3C2410X, the network interface is widened. According to the circuit schematic diagram, the registers BWSCON and BANKCON3 are set to make the network card work in the memory mode, and the interrupt function and related driver codes are written.)

[下载]17452342054.rar

2022-7-29 17:45 上传

文件大小: 374 KB
下载次数: 0