（1）在交换机上创建聚合接口（2）在交换机上配置聚合端口（3）端口聚合增加交换机之间的传输带宽，验证当一条链路断开时仍能相互通讯。

((1) Create an aggregate interface on the switch (2) Configure an aggregate port on the switch (3) Port aggregation increases the transmission bandwidth between switches, and verify that when a link is disconnected, they can still communicate with each other.)

[下载]16165681064.rar

2022-8-9 16:16 上传

文件大小: 63 KB
下载次数: 0

（1）在交换机上创建聚合接口（2）在交换机上配置聚合端口（3）端口聚合增加交换机之间的传输带宽，验证当一条链路断开时仍能相互通讯。

((1) Create an aggregate interface on the switch (2) Configure an aggregate port on the switch (3) Port aggregation increases the transmission bandwidth between switches, and verify that when a link is disconnected, they can still communicate with each other.)

[下载]16165681064.rar

2022-8-9 16:16 上传

文件大小: 63 KB
下载次数: 0