找回密码
 立即注册
相关推荐换一批
  1. YD/T 2740.3-2014 无线通信室内信号分布系统 第3部分:放大器技术要求和测试方法
  2. YD/T 2740.4-2014 无线通信室内信号分布系统 第4部分:光纤设备技术要求和测试方法
  3. YD/T 2705-2014 持续数据保护(CDP)灾备技术要求
  4. NB/T 20446-2017RK 压水堆核电厂主蒸汽系统设计要求
  5. NB/T 10187-2019 水上光伏系统用浮体技术要求和测试方法
  6. NB/T 10186-2019 光储系统用功率转换设备技术规范
  7. HG/T 20654-2016 代替 HG/T 20654-1998 化工企业化学水处理系统监测与控制设计条件?
  8. YD/T 2675-2013 VHF/UHF 无线电监测测向系统开场测试参数和测试方法
  9. YD/T 1363.5-2014 通信局(站)电源、空调及环境集中监控管理系统 第5部分:门禁集中监
  10. HG/T 20513-2014 代替 HG/T 20513-2000 仪表系统接地设计规范
  11. YD/T 2485-2013 NX100Gbit/s 光波分复用(WDM)系统技术要求
  12. YD/T 3193-2016 基于统一 IMS 的 Web 实时通信(WebRTC)系统技术要求
  13. GB/Z 38623-2020 智能制造 人机交互系统 语义库技术要求
  14. YD/T 2528-2013 扩频数字微波通信设备和系统技术要求及测试方法
  15. NB/T 42139-2017 光伏系统用铅酸蓄电池技术规范
  16. NB/T 35118-2018 水电站油系统技术规范
  17. GB/T 51404-2019 有色金属堆浸场浸出液收集系统技术标准
  18. GB/T 38892-2020 车载视频行驶记录系统
  19. GB/T 38848-2020 智能工厂 过程工业能源管控系统技术要求
  20. GB/T 39473-2020 北斗卫星导航系统公开服务性能规范
  21. GB/T 39437-2020 供排水系统防雷技术规范
  22. GB/T 39426-2020 城市轨道交通 永磁直驱车辆通用技术条件
  23. GB/T 39463-2020 工业机器人电气设备及系统通用技术条件
  24. GB/T 39347-2020 空间用光纤光栅传感系统通用规范
The布线wiring系统 | 教育系统应用 2022-08-27 120 0star收藏 版权: . 保留作者信息 . 禁止商业使用 . 禁止修改作品
1、设计范围培尔学院的网管核心位于图书馆大楼的3楼,目前有教工宿舍、外语核心、图书馆大楼以及教学楼需要与核心连接成校园网,并且各楼分别需要网络布线以建设楼内局域网。2、设计目标的确定??大家为该校园网设计的综合布线系统将基于以下目标:1)??符合当前和长远的信息传输要求。2)??布线系统设计遵从G际(ISO/CEI11801)标准。3)??布线系统采用G际标准建议的星形拓扑结构。4)??考虑电脑网络的速度向100Mbps发展的需要。5)??布线系统的信息出口采用G际标准的RJ45插座。6)??布线系统符合综合业务数据网的要求。7)??布线系统要立足开放原则。

(1. Design scope The network management core of Peier College is located on the 3rd floor of the library building. At present, there are staff dormitories, foreign language cores, library buildings and teaching buildings that need to be connected to the core to form a campus network, and each building requires network wiring to construct buildings. Intranet. 2. Determination of design goals? The integrated wiring system we design for the campus network will be based on the following goals: 1)?? Meet the current and long-term information transmission requirements. 2) The design of the wiring system complies with the international (ISO/CEI11801) standard. 3) The wiring system adopts the star topology recommended by international standards. 4)?? Consider the need for the development of the speed of the computer network to 100Mbps. 5) The information outlet of the wiring system adopts the international standard RJ45 socket. 6) The wiring system meets the requirements of the integrated service data network. 7) The wiring system should be based on the principle of openness.)

[下载]13520578388.rar




上一篇:光纤收发器介绍
下一篇:宽带小区接入方案